- Startseite
- Das Unternehmen
- Spindelhubelemente
- Kegelradgetriebe
- Elektrische Linearantriebe
- Rollengewindespindel
- System-Komponenten
- Vertrieb
- Anwendungen
- Downloads
- Kontakt
- Links
- F.u.A.
Ingenieur-
Referenzanleitung
Suche
Tel: +44 (0)1346 513131 Fax: +44 (0)1346 516827 | Kontakt
Select Region:
Home : System Components : Drive Components : Plummer Blocks
Design GuideOne piece housing
| Model | Bore size (mm) | Weight (kg) |
|---|---|---|
| PB1-20 | 20 | 0.6 |
| PB1-30 | 30 | 1.1 |
| PB1-40 | 30 | 1.9 |
| PB1-50 | 50 | 2.8 |
| PB1-60 | 60 | 4.5 |
Cast Iron housing with eccentric locking ring
For other styles and sizes of Plummer Blocks consult Power Jacks Ltd
Split housing
Notes:
Plummer blocks are to DIN736 with anti-friction bearings with tapered bores and adapter sleeve. The housings are made of cast iron and are sealed with felt strips on both sides. The housings are designed to allow floating or located bearings (bearing position set with one or two locating rings)
| Model | Bore size (mm) | Weight (kg) |
|---|---|---|
| PB20 | 20 | 1.4 |
| PB30 | 30 | 2 |
| PB40 | 30 | 2.9 |
For other styles and sizes of Plummer Blocks consult Power Jacks Ltd
© 2012 Power Jacks Limited
All rights reserved
Registered in Scotland No. 103849